![]() |
Elecraft K1 on 40m QRP frequency. |
I don't take this too seriously as there are plenty of other calls on my time, but it is an opportunity to get on the air and work a few stations with 5W CW or 10W SSB.
This year got off to a good start with a contact on 23rd December with SK6SAQ at Grimeton in Sweden � home to the Alexanderson alternator that puts out a 200kW signal on 17.2kHz.
SAQ also has a special event callsign so it was good to get operator Kjell in the log using 5W from a Yaesu FT-991 into an outside EFHW. I really must visit Grimeton one day.
I also dragged out my Bencher paddle as I was sending some awful Morse with my Kent single lever I think I was getting key bounce so will have to take a closer look. The Bencher was fine, which was good news.
After Christmas I turned to my Elecraft K1, which I finished in the summer after owning the kit for about 12 years!
This brought CW QSOs with Peter OM0WR in the Slovak Republic on 7.029MHz with 5W into my loft-mounted zig-zag dipole.
![]() |
The YT160TESLA QSL card. |
I have an Icom IC-7300 on test, which belongs to my local club and that brought 9A1700SBD in Dubrovnik, Croatia, although it took 25W to get through.
![]() |
The view across the rooftops of Dubrovnic, Croatia. |
2016 was the 1700th anniversary of St. Blaise, patron saint of Dubrovnik � if you ever get the chance to go there, do as it is absolutely beautiful.
Station LZ463PP then went in the log with 10W from the IC-7300 and a W5GI dipole on 17m SSB, so still QRP. It was celebrating 463 years of Saint Patapii.
Finally I had a nice (but weak) QSO with Ian EA7JUK in Lubrin, Spain on 20m CW using 5W from the K1 and an indoor dipole. Ian's UK call is G0WHX.
![]() |
The Reverse Beacon Network proved everything was working! |
So, I heard a lot more stations than I worked, but I had fun � which is what it is all about.
0 comments:
Post a Comment